Autoplay
Autocomplete
Previous Lesson
Complete and Continue
Bowl Turning for Beginners
1. Introduction to Bowl Turning
1. Introduction (1:16)
2. Things to Consider
2. Things to Consider (0:58)
3. Advanced Safety
3. Advanced Safety (2:51)
4. Work Holding for Bowl Turning
4.1 Woodturning Tools and Work Holding Overview (1:16)
4.2 Four Jaw Chuck (0:36)
4.3 Woodturning Jaws (1:48)
4.4 Faceplate (1:14)
4.5 Screw Chuck (0:28)
5. Timber Selection
5.1 Timber Selection Overview (71:31)
5.2 Choosing a Bowl Blank (1:21)
5.3 Turning Wet Timber vs Dry Timber (1:27)
5.4 Storing Your Blanks (1:20)
6. Tool Sharpening
6.1 Overview of Tool Sharpening Principles (1:00)
6.2 Advanced Sharpening for Bowl Turning (2:45)
7. Sanding and Finishing
7.1 Sanding & Finishing Considerations For Bowl Turning (0:49)
7.2 Abrasive Options for Bowl Turning (1:14)
7.3 Finishes Suitable for Bowls (3:23)
8. Turning Your First Bowl
8.1 Project Overview (0:35)
8.2 Mounting the Blank (1:08)
8.3 Truing the Blank (4:22)
8.4 Creating a Recess and Foot (3:08)
8.5 Removing the Waste and Cleaning the Surface (5:07)
8.6 Sanding and Finishing (7:28)
8.7 Remounting the Bowl (1:10)
8.8 Cleaning the Edge (0:52)
8.9 Removing the Centre (6:59)
8.10 Final Sanding and Finish (5:56)
8.11 Troubleshooting (0:48)
9. Texturing and Embellishing your Bowls
9.1 Texturing and Colouring Overview (0:30)
9.2 Texturing Tools (1:29)
9.3 Beading Tools (0:45)
9.4 Burning Wires (0:37)
9.5 Colouring Techniques (1:27)
10. Wet Turning
10.1 Introduction to Wet Turning (0:31)
10.2 Mounting the Blank (1:41)
10.3 Cleaning the Face and Removing the Waste (10:02)
10.4 Creating a Recess and Foot (2:38)
10.5 Remounting the Bowl (1:25)
10.6 Cleaning the Face (1:52)
10.7 Removing the Centre (6:01)
10.8 Lathe Maintenance for Wet Turning (0:33)
10.9 Remounting a Dry Bowl and Cleaning the Outside Edge (1:53)
10.10 Reshaping the Foot and Recess (3:29)
10.11 Shaping the Edge (2:00)
10.12 Refining the Outside Surface (3:55)
10.13 Sanding the Outside (3:11)
10.14 Refining the Inside (2:51)
10.15 Final Sanding and Finishing (6:40)
10.16 Removing the Foot and Finishing (5:22)
11. End of Course
11. End of Course (0:08)
12. Extra Resources
12.1 Bowl Turning for Beginners Course Booklet
4.4 Faceplate
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock