Autoplay
Autocomplete
Previous Lesson
Complete and Continue
Woodturning for Beginners
Things to Expect During the Course
What to Expect
1. Introduction to Woodturning
1. Introduction to Woodturning for Beginners (2:21)
2. Equipment Overview
2. Equipment Overview (1:29)
3. The Lathe
3. Anatomy of the Lathe (4:41)
4. Safety
4.1 Safety on the Lathe (1:36)
4.2 PPE (1:33)
5. Woodturning Centres
5. Woodturning Centres (2:47)
6. Four Jaw Chuck
6. Four Jaw Chuck (1:15)
7. Woodturning Chisels Overview
7. Woodturning Chisels Overview (3:21)
8. Introduction to Sharpening Your Tools
8.1 Principles of Sharpening (1:23)
8.2 Sharpening Grinders (1:41)
8.3 Sharpening Jigs (0:25)
8.4 Tips Before You Start (1:33)
8.5 Sharpening - Roughing Gouge (1:24)
8.6 Sharpening - Skew Chisel (2:41)
8.7 Sharpening - Spindle Gouge (1:57)
8.8 Sharpening – Bowl Gouge (2:31)
8.9 Sharpening – Parting Tool (3:02)
8.10 Round Nose Scraper (2:23)
9. Timber Overview
9.1 Timber Overview (3:15)
9.2 Density & Timber Types (1:46)
9.3 Common Timber Defects (5:21)
9.4 Good Timber for Turning (2:06)
10. Sanding
10. Sanding (3:33)
11. Finishing
11. Finishing (4:17)
12. Practice Piece
12.1 Mounting the Blank (1:46)
12.2 Roughing Gouge (2:11)
12.3 Skew Chisel (6:42)
12.4 Spindle Gouge (2:06)
12.5 Round Nose Scraper (1:07)
12.6 Parting Tool (0:56)
12.7 Bowl Gouge (2:35)
12.8 Practice Piece - Troubleshooting (5:47)
13. Project 1 - Toadstool
13.1 Project 1 Introduction (0:29)
13.2 Mounting to the Lathe (1:39)
13.3 Shaping the Top (2:16)
13.4 Roughing Down the Stem (2:21)
13.5 Shaping the Stem (2:09)
13.6 Cleaning the Underside (2:19)
13.7 Sanding & Polishing (6:59)
13.8 Removing From the Lathe & Finishing (3:47)
14. Project 2 - Vase
14.1 Project 2 Introduction (0:20)
14.2 Mounting to the Lathe (1:32)
14.3 Roughing Down the Blank (1:06)
14.4 Creating the Tenon (1:03)
14.5 Mounting the Chuck (0:43)
14.6 Roughing Down the Neck (1:25)
14.7 Drilling the Timber (2:56)
14.8 Hollowing the Flute (1:41)
14.9 Shaping the Neck & Shoulder (3:08)
14.10 Shaping the Vase (1:10)
14.11 Partially Parting Off (0:30)
14.12 Sanding & Polishing (6:57)
14.13 Parting Off (1:26)
15. Extra Resources
15.1 Woodturning for Beginners Booklet
15.2 Troubleshooting Tips
15.3 Glossary of Terms
15.4 Additional Resources
14.5 Mounting the Chuck
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock