Autoplay
Autocomplete
Previous Lesson
Complete and Continue
Woodturning for Beginners
Things to Expect During the Course
What to Expect
1. Introduction to Woodturning
1. Introduction to Woodturning for Beginners (2:21)
2. Equipment Overview
2. Equipment Overview (1:29)
3. The Lathe
3. Anatomy of the Lathe (4:41)
4. Safety
4.1 Safety on the Lathe (1:36)
4.2 PPE (1:33)
5. Woodturning Centres
5. Woodturning Centres (2:47)
6. Four Jaw Chuck
6. Four Jaw Chuck (1:15)
7. Woodturning Chisels Overview
7. Woodturning Chisels Overview (3:21)
8. Introduction to Sharpening Your Tools
8.1 Principles of Sharpening (1:23)
8.2 Sharpening Grinders (1:41)
8.3 Sharpening Jigs (0:25)
8.4 Tips Before You Start (1:33)
8.5 Sharpening - Roughing Gouge (1:24)
8.6 Sharpening - Skew Chisel (2:41)
8.7 Sharpening - Spindle Gouge (1:57)
8.8 Sharpening – Bowl Gouge (2:31)
8.9 Sharpening – Parting Tool (3:02)
8.10 Round Nose Scraper (2:23)
9. Timber Overview
9.1 Timber Overview (3:15)
9.2 Density & Timber Types (1:46)
9.3 Common Timber Defects (5:21)
9.4 Good Timber for Turning (2:06)
10. Sanding
10. Sanding (3:33)
11. Finishing
11. Finishing (4:17)
12. Practice Piece
12.1 Mounting the Blank (1:46)
12.2 Roughing Gouge (2:11)
12.3 Skew Chisel (6:42)
12.4 Spindle Gouge (2:06)
12.5 Round Nose Scraper (1:07)
12.6 Parting Tool (0:56)
12.7 Bowl Gouge (2:35)
12.8 Practice Piece - Troubleshooting (5:47)
13. Project 1 - Toadstool
13.1 Project 1 Introduction (0:29)
13.2 Mounting to the Lathe (1:39)
13.3 Shaping the Top (2:16)
13.4 Roughing Down the Stem (2:21)
13.5 Shaping the Stem (2:09)
13.6 Cleaning the Underside (2:19)
13.7 Sanding & Polishing (6:59)
13.8 Removing From the Lathe & Finishing (3:47)
14. Project 2 - Vase
14.1 Project 2 Introduction (0:20)
14.2 Mounting to the Lathe (1:32)
14.3 Roughing Down the Blank (1:06)
14.4 Creating the Tenon (1:03)
14.5 Mounting the Chuck (0:43)
14.6 Roughing Down the Neck (1:25)
14.7 Drilling the Timber (2:56)
14.8 Hollowing the Flute (1:41)
14.9 Shaping the Neck & Shoulder (3:08)
14.10 Shaping the Vase (1:10)
14.11 Partially Parting Off (0:30)
14.12 Sanding & Polishing (6:57)
14.13 Parting Off (1:26)
15. Extra Resources
15.1 Woodturning for Beginners Booklet
15.2 Troubleshooting Tips
15.3 Glossary of Terms
15.4 Additional Resources
12.8 Practice Piece - Troubleshooting
Lesson content locked
If you're already enrolled,
you'll need to login
.
Enroll in Course to Unlock